Geberit MONOLITH PLUS Bedienungsanleitung Seite 12

EN
Communication protocol for light control (DALI-2)
The Geberit Monolith Plus sanitary module features a DALI 2 interface (Digital Addressable
Lighting Interface) for connection to a light control. The Geberit Monolith Plus sanitary module
meets the requirements of IEC 62386-101, IEC 62386-102 and IEC 62386-207.
Simplified EU Declaration of Conformity
Geberit International AG hereby declares that the radio equipment type Geberit Monolith Plus
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://doc.geberit.com/971622000.pdf.
Simplified UK Declaration of Conformity
Geberit International AG hereby declares that the radio equipment type Geberit Monolith Plus
is in compliance with the Radio Equipment Regulations 2017.
The full text of the UK declaration of conformity is available at the following internet address:
https://doc.geberit.com/971623000.pdf.
Operation
Control panel
Using the Geberit Monolith Plus
When a user approaches the sanitary module, the orientation light lights up and the odour
extraction unit starts up. To release a flush, press the <Large flush volume> actuator button for
a large flush or the <Small flush volume> actuator button for a small flush.
If the orientation light permanently lights up red, the filter must be replaced. → See
Replace the filter.
If the orientation light flashes red, there is a malfunction. → Contact customer service.
12
1 Orientation light
2 <Small flush volume> button
3 <Large flush volume> button
9007209651644683 © 11-2022
971.480.00.0(00)