Control Panel - Mestic Rta-2500 Bedienungsanleitung

CONTROL PANEL

Note: If the remote controller is missing, operate on the control panel.
ON/OFF button
1.
Operation starts when pressing this button, and stops when pressing this button again.
LIGHT button
2.
Press this button to turn on or turn off display light on indoor unit.
(+/-) button
3.
Press the + button to increase the set(operating) temperature of the unit,and press the - button to decrease the
set(operating) temperature of the unit. the temperature setting range is from 16~30°C (61~86 oF).
FAN SPEED button
4.
Select the fan speed LOW, MED, HIGH and TURBO in sequence.
MODE button
5.
Select the operation mode, COOL,FAN, HEAT.
FILTER CHECK indicator
6.
This feature is a reminder of cleaning the air filter(normal maintenance) for more efficient operation. The light will
turn on automatically after the fan works more than 250 hours. If the light is on, turn off and power off the unit,
take the air filter out and clean it, then re-install the air filter, power on and turn on the unit, the light will still be
on, press + button for 5s,the light will turn off.
ON/OFF temp.
indicator indicator
COOL
indicator
Reciever
window
HEAT
indicator
17