MESTIC RTA-2500 Bedienungsanleitung Seite 15

•
Clock function
With the clock function, the clock time can be set. When the clock function is active, the "
on the remote controller. Press the "+" or "-" button within 5 seconds to set the clock time. By pressing the
button "+" or "-", the setting will increase or decrease with 1 minute at a time. Hold the "+" or "-" button for
2 seconds, the time setting will now change quickly until the required time is reached. Press the "SET" button
within 5 seconds to confirm the new setting. The "
6. LED button
•
Press this button to turn the LED light on the panel on or off.
7. Turbo button
•
In "COOL" or "HEAT" mode, press the "TURBO" button to turn on the quick "COOL" or "HEAT" mode. The
" " icon is now displayed on the remote controller. When this function is active, the air conditioner will run
at a super-high fan speed, to quickly cool or heat. This way the ambient temperature approaches the pre-set
temperature as soon as possible.
" icon will stop flashing.
" icon flashes
15