Easy 155 Printer; Repare Your Photo Easy; Connect The Mains Supply - Sagem PHOTO EASY 155 Bedienungsanleitung

3 P
REPARE
Remark: When installing your printer near a wall or some other object, keep an open space of at least 4 inches at the
back of the printer, to make sure the movement of the sheet of paper being printed is not obstructed.
Please refer to the safety instructions at the beginning of this user guide before making any
connections.
Insert one end of the mains lead into the corresponding socket of the power supply.
Connect the power supply to the printer as shown in the illustration below.
Plug the other end of the power supply mains lead into a wall socket.
Switch on the printer by pressing the " I " on the on/off switch located at the back of the
printer. The green light comes on and three lines are displayed on the screen.
Your printer features a SCSI Mass storage master USB connector (A) and a slave USB
connector (B). The latter is used for connection with a master terminal (PC, etc.).
Remarque : To obtain the list of devices compatible with this USB port (A), visit the site www.sagem.com.
Y P
OUR HOTO
C
ONNECT THE MAINS SUPPLY
- 3 -
E 155 P
ASY RINTER
B
A