Declaration Of Conformity - CEMO Caddy 60l Originalbetriebsanleitung

9. Declaration of Conformity

EC Declaration of Conformity to Machinery Directive 2006/42/EC Appendix II 1.A
The manufacturer / distributor
CEMO GmbH
In den Backenländern 5
D-71384 Weinstadt
hereby declares that the following product
Product designation:
Model designation:
Type designation:
Serial number:
Trade name:
Year of manufacture:
Description:
60 l spray caddy for liquid thawing agents, suitable for spraying commercially available water-based
thawing agents
complies with all relevant specifications from the above-named directive and further applied directives
(see below), including their amendments applicable at the time of the declaration. The manufacturer
bears sole responsibility for issuing this Declaration of Conformity.
The following EU Directives were applied:
Machinery Directive 2006/42/EC
RoHS Directive 2011/65/EU
The protection targets of the following additional EU Directives have been met:
Low-Voltage Directive 2014/35/EU
The following harmonised standards were applied:
EN 1005-1:2001+A1:2008
EN 1005-2:2003+A1:2008
EN 50581:2012
EN 60204-1:2006
EN 614-1:2006+A1:2009
EN ISO 11161:2007
EN 13849-1:2015
Name and address of legal entity authorised to assemble the technical documentation:
CEMO GmbH
In den Backenländern 5
71384 Weinstadt, Germany
Location: D-71384 Weinstadt
Date: 19/11/2018
_______________________________
(Signature)
Eberhard Manz, Managing Director
spray caddy 60 l
CEMO
spray caddy 60 l for liquid thawing agents
10863
spray caddy
2017
Safety of machinery – Human physical performance – Part 1: Terms and
definitions
Safety of machinery – Human physical performance – Part 2: Manual
handling of machinery and component parts of machinery
Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements (IEC 60204-1:2005 (modified))
Safety of machinery – Ergonomic design principles – Part 1: Terminology
and general principles
Safety of machinery – Integrated manufacturing systems – Basic require-
ments (ISO 11161:2007)
Safety of machinery – Safety-related parts of control systems – Part 1:
General principles for design (ISO 13849-1:2015)
GB
17