Before The First Use - HOMCOM 800-148V70 Bedienungsanleitung

III. Notice
1. Place the product on a level, even and stable surface.
2. This product is for domestic use only. Never use for commercial purposes.
3. Failure to properly use the product, using for commercial purposes and failure to
follow instructions will void your warranty. We are not responsible for damages
caused by any type of neglect.
4. If any damages occur, do not try and repair the product . The product must be sent
back to the manufacturer for any repairments.
5. Always unplug the product after use.
6. Before cleaning the product, wait 30 minutes for the product to properly cool down.
7. Fried ingredients should be a golden colour, not black or brown. Any burnt pieces
should be thrown away.
IV. Automatic shut down
The product has a timer – when it reaches 0, it will ring and shut down automatically.
To shut down manually, hold the power button on the operation panel.
1. Remove all packaging.
2. Remove glue and labels from the product.
3. Clean the frying tank and tray thoroughly with hot water, detergent and a non-
abrasive sponge.
4. Clean the inside and outside of the product with a warm, wet cloth.
5. This fat-free fryer uses hot air heating. Never pour oil or fat into the fryer.
1. Place the product on a flat, level and stable surface. Ensure the surface is heat-
resistant.
2. Place the frying tray into the tank correctly.
3. Never pour oil or other liquid into the tank. Do not cover the air openings – this will
stop the airflow and stop the product from heating properly.
This fryer can cook different ingredients. The additional manual will help you get the
best results.
I. Fat-free frying
1. Plug into a grounded socket.
2. Carefully pull out the tank from the fryer.
3. Place ingredients into the tank.
Note:
- Place the tray into the tank before putting in ingredients.
- Ensure you place the correct amount of ingredients, so you get the best results.
4. Place the tank into the fryer. Do not touch the fryer when in use, avoiding the risk of
scalding. Use the handle to move the product.
5. After selecting a mode, choose the temperature needed to cook ingredients. Press
'+' or '-' to raise or lower the temperature by 5
6. Adjust the time to suit your needs. Press '+' or '-' to increase or lower the time by
one minute.

BEFORE THE FIRST USE

Preparation
Operating this product
°C (°F).
5