Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Filling the Tank
Use only commercial pressured butane can for filling the lighter.
1. Hold the lighter with one hand so the filling valve
(1) is on the top.
2. Attach the correct adaptor on the valve and
firmly press the can onto the valve for approx. 3
seconds. For good filling pump the can down a
few times.
3. After every gas refilling, rest the lighter for
2 minutes before using it again, so leaking gas may
evaporate.
Using
Push the sliding switch (3) forwards. The flame is on as long as you
keep the sliding switch in this position.
Adjusting the flame
For changing the intensity of the flame,
use the flame regulator (2). For a small
flame turn the flame regulator in
direction "–" and for large flame turn
the regulator in direction "+".
Cleaning and Storing
▪ Do not use abrasives to clean the
unit in order not to damage the
surfaces.
▪ Store the lighter in an adequate
distance from flammable objects
and liquids and keep it out of reach
of children.
Design protected by Copyright
Safety Notes
4
1
3
2
1
© Westfalia 08/19
2
Werbung
