PEAKnx Controlmicro Kurzanleitung Seite 25

2 Setting up the YOUVI door station module
2. Go to „Install Door intercom".
3. Under More > License, you can view the remaining days of your trial license.
4. For unlimited use, please purchase the module in the PEAKnx Shop.
5. Select the Door intercom icon on the Dashboard page to open the settings.
6. Add a new door station via the „+" symbol.
7. Intercom name: This name appears as a label in the upper left corner of the widget.
8. Username: Enter the name that you have assigned in the DCS-IP Gateway for the touch
panel with YOUVI (IP telephone), e.g. "Controlmicro".
9. Password: Enter the password associated with the user name here.
10. SIP Server: Enter the IP address of the DCS IP Gateway here.
11. Camera Stream: If available enter a link of an additional camera stream here.
12. Stream Type: Select a suitable streaming format.
13. Stream Refresh Interval (ms): If "JPEG" was selected as streaming format, the refresh inter-
val has to be set here, enter e.g. 500 ms to receive a new image twice per second.
14. Unlock method: Select the mechanism by which your door opener function is connected.
− Lock After (for telegram): If a group address is specified, a 1 will be sent to the group
address when the door opener icon is touched and a 0 is sent after the opening interval
has passed.
15. Save your entries.
25