Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.2 Teaching-in
Please read this section completely before starting
with any teaching!
Both devices to be connected are set to teach mode
for teaching. The actuator have no special teach
button. Hold the channel button on the actuator for at
least 4 seconds for teaching. Teach mode is indicated
by the device LED flashing continuously.
If no teaching occurs, teach mode is automatically
ended after 20 seconds. If other devices are in teach
mode, these are taught.
8
Operation
After teaching, simple operating functions are available
using the taught control elements. Brief press of the
button: ON/OFF, long button press: Dim. The following
behavior results in this case:
31
Werbung
Inhaltsverzeichnis
