Product Description - Suntherm AL+ 200 Bedienungsanleitung

PRODUCT DESCRIPTION

i
The heating panel is designed to heat or maintain residential, commercial or industrial areas. The front side of the
heating panel has been treated with a surface coating. The surface of the heating panel is smooth or sandblasted
depending on the panel type. It is a Class I appliance with IP 44 powered with 230V/50Hz. The product is equipped
with a thermostat to prevent overheating.
The product is designed to be installed on a wall. Plugging into the electrical mains is typically done by means of
a connecting cable ended with a sheathed male plug. Another option is to plug the inlet box at the back side of the
panel into the electrical mains.
The panel comes with a standard installation set for the brickwork. Make sure the anchoring material is suitable for
the chosen material, or if need be consult with the anchoring material supplier. The heating panel may be installed on
surfaces with Class A1, A2, B, C or D fire resistance rating. The dimensions and input power of the models are listed
in the table below.
TYPE
SUNTHERM AL+ 200
SUNTHERM AL+ 300
SUNTHERM AL+ 400
SUNTHERM AL+ 500
SUNTHERM AL+ 500dl
SUNTHERM AL+ 600
SUNTHERM AL+ 700
POWER (W) A (mm)
200 510
300 610
400 860
500 950
500 1010
600 1210
700 1210
B (mm)
510
610
510
610
510
510
610
7
C (mm) D (mm)
420 420
520 520
770 420
860 520
920 420
1120 420
1120 520