Electrical Installation; Operation And Maintenance - Suntherm AL+ 200 Bedienungsanleitung

PLACEMENT
The heating panels are designed to be mounted on the wall
at a distance of at least 0.2m from the corner. There must
be at least 0.5 m of unobstructed air space in front of the
heating panel to ensure free circulation of air and to prevent
overheating of the unit. In bathrooms, the heating panel must
be installed in conformity with the regulation IEC 60364-7-701
and must not be placed into the zone marked in the picture on
the right. Installation in the bathroom must ensure that the
person in the bath or the shower cannot touch the switch or
other controlling device. Do not cover the panel by any means!

ELECTRICAL INSTALLATION

In case of a fixed connection, unscrew the case of the inlet box at the back side of the panel and disconnect the
standard male plug. Substitute it by connecting the fixed connection inlet according to the instruction below.
The fixed connection of the heating panel must contain an element allowing its disconnection from the power mains,
able to fully and completely disconnect contacts at all poles.
The power connection must be equipped with a device enabling disconnection from the power source, where the
distance of disconnected contacts is no less than 3.5 mm at all poles.
Colour coding of conductor wires:
• Brown wire – L – phase
• Blue wire – N – neutral
• Yellow wire – PE - ground
If the power connection cable is damaged,
the heating panel must be put out of operation.

OPERATION AND MAINTENANCE

Remove dust from the heating panel surface regularly by wiping with a damp cloth without any detergent or solving
agent, or with a vacuum cleaner. Dust must always be removed prior to starting the heating season. The heating
panel must be cold and disconnected from the power source during maintenance.
During the first operation of the heating panel or the first operation in a given heating season, heat the panel
gradually and make sure the heated room is well aired.
Depending on the environment in the heated premises, the colour shade of the panel radiant surface may change.
All repairs must be carried out solely by the manufacturer.
WARRANTY CONDITIONS
WARRANTY CONDITIONS
The panel has a 15-year functional warranty from the date of sale. The warranty does not apply to defects caused
The panel has a 10-year functional warranty from the date of sale. The warranty does not apply to defects caused
by transport, inappropriate storage, unauthorized installation or any interference with the product structure. The
by transport, inappropriate storage, unauthorized installation or any interference to the product structure. The
warranty also does not cover usual wear and tear of the panel or partial changes to the colour of the panel radiant
warranty also does not cover usual wear and tear of the panel or partial changes to the colour of the panel radiant
surface. The purchase receipt serves as the warranty certificate.
surface. The purchase receipt serves as the warranty certificate.
8
L
N
PE