Suntherm AL+ 200 Bedienungsanleitung Seite 9

MOUNTING
1. Drill holes according to distances in the table on
page 7.
3. Hook the heating panel on the screws.
DISMOUNTING
1. Unplug the cable and loosen the anchoring screws
with a wrench by 10mm.
2. Insert wall plugs into the holes and bolt the
anchoring screws so that they jut out by 10mm.
4. Tighten the screws by 10mm with a wrench and plug
the cable in.
2. Take the heating panel off the screws.
9
~ 10 mm