Product Description - Suntherm DRIER Bedienungsanleitung

PRODUCT DESCRIPTION

i
The bathroom heating panel is designed to heat bathrooms and dry laundry. The laundry can be dried solely on the
metal rungs avoiding direct contact with the heating area of the panel. The front side of the heating panel has been
treated with a surface coating. The surface of the heating panel is smooth or sandblasted depending on the panel
type. It is a Class I appliance with IP 44 powered with 230V/50Hz.
The product is designed to be installed on a wall and is equipped with a thermostat to prevent overheating. Plugging
into the electrical mains is done by means of a coiled connecting cable ended with a sheathed male plug UNISCHUKO
with a circuit closer (type V) or with a special male plug UNISCHUKO with an integrated knob controlling space
temperature, wih a circuit closer and a signal diode (type R). The heating panel may be installed on surfaces with
Class A1, A2, B, C or D fire resistance rating. The dimensions and input power of the models are listed in the table
below.
Multigear model is equipped with removable hangers and support leg, which allows standalone use.
TYPE
SUNTHERM DRIER 200
SUNTHERM DRIER 400
SUNTHERM DRIER MULTIGEAR
POWER (W) A (mm)
200 840
400 890
400 890
7
B (mm) C (mm) D (mm) SUPPORT (mm)
390 750
530 770
530 770
-
300
-
420
420 770