Seite 1
INFRAROT HEIZPANEEL INFRARED HEATING PANEL SUNTHERM AL + BEDIENUNGSANLEITUNG seite 2-5 INSTRUCTION MANUAL page 6-9...
Seite 2
HINWEIS • Montagen und jegliche Eingriffe in das Heizpaneel dürfen ausschließlich von einer fachkundigen Person durch- geführt werden. Vor dem Eingriff oder der Handhabung muss das Heizpaneel vom Netz getrennt werden. Beim Transport des Heizpaneels, der Handhabung und Montage ist Vorsicht geboten, da es sich um ein zerbrechliches Material handelt.
Baustoffklassen A1, A2, B, C, D montiert werden. Die Abmessungen der einzelnen Modelle sind in der folgenden Tabelle angeführt. AKTUELL (W) A (mm) B (mm) C (mm) D (mm) SUNTHERM AL+ 200 SUNTHERM AL+ 300 SUNTHERM AL+ 400 SUNTHERM AL+ 500 SUNTHERM AL+ 500dl 1010 SUNTHERM AL+ 600...
ANBRINGUNG Die Heizpaneele sind zur Befestigung an der Wand bestimmt, in einer Mindestentfernung von 0,2 m von der Ecke des Zimmers. Vor dem Heizpaneel muss ein Freiraum von mindestens 0,5 m vorhanden sein, um eine freie Luftzirkulation zu gewährleisten und eine Überhitzung zu vermeiden.
MONTAGE ~ 10 mm 1. Bohren Sie die Löcher mit den erforderlichen 2. Stecken Sie die Dübel in die entsprechenden Löcher Abständen, siehe Tabelle Seite 3. und schrauben Sie die mitgelieferten Schrauben zum Einhängen des Heizpaneel ein. 4. Ziehen Sie die Schrauben mit dem 10mm Gabelschlüssel 3.
Seite 6
CAUTION • Assembly of and manipulation related to the heating panel must be carried out by qualified personnel. The heating panel must be disconnected from the power source prior to work or manipulation with it. Care must be taken during transport, manipulation and assembly of the heating panel as the material of the product is fragile.
Class A1, A2, B, C or D fire resistance rating. The dimensions and input power of the models are listed in the table below. TYPE POWER (W) A (mm) B (mm) C (mm) D (mm) SUNTHERM AL+ 200 SUNTHERM AL+ 300 SUNTHERM AL+ 400 SUNTHERM AL+ 500 SUNTHERM AL+ 500dl 1010 SUNTHERM AL+ 600 1210...
PLACEMENT The heating panels are designed to be mounted on the wall at a distance of at least 0.2m from the corner. There must be at least 0.5 m of unobstructed air space in front of the heating panel to ensure free circulation of air and to prevent overheating of the unit.
Seite 9
MOUNTING ~ 10 mm 1. Drill holes according to distances in the table on 2. Insert wall plugs into the holes and bolt the page 7. anchoring screws so that they jut out by 10mm. 4. Tighten the screws by 10mm with a wrench and plug 3.
Seite 10
Compliant MADE IN EU office@suntherm-austria.at www.suntherm.at...