Eleglide T1 Bedienungsanleitung Seite 8

EN
Step 3 Fix The Headset
A) Adjust the headset of the bike to the right position.
B) Tighten the headset with the M4/M5 socket head wrench.
Step 4 Adjust The Stem Angle (Only for T1 Step-Thru)
A) Loose the stem with the M6 socket head wrench.
B) Adjust the stem to the angle you want and fix it by tightening the screws.
Step 5 Install The Headlight
A) Place the headlight in the right position.
B) Fix the light by tightening the screw with the M4 socket head wrench
06