Eleglide T1 Bedienungsanleitung Seite 10

EN
Step 8 Install The Pedals
Pedals
Step 9 Install The LCD Display
A) To make it easy to install, disassemble one of the supports of the display first with the M3 socket
head wrench.
B) Slightly open another support to get the display stuck on the handlebar.
C) Slightly open the disassembled support and buckle it on the handlebar. Fix it with the M3 socket
head wrench.
D) Fix the display in the middle of the handlebar with the M3 socket head wrench.
E) Open the clip of the display button and buckle it on the handlebar. And use the M2.5 hex wrench to
tighten the clip and fix the button.
F) Connect the display cable with the power cord.
08
Left Right