Intended Use; General Description; Extent Of The Delivery; Functional Description - Parkside PUV 2000 C2 Originalbetriebsanleitung

Intended Use

The hot air weed killer is suitable for remo-
ving weeds between paving slabs, on plas-
tered surfaces, masonry, in flower beds
and lawn areas during growth periods,
as well as for removing coats of paint, for
heating (for example, shrink tubing), and
for reshaping and welding plastics.
It can be used to loosen adhesive joints
and to ignite charcoal.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate
the guarantee. Any other use that is not ex-
plicitly approved in these instructions may
result in damage to the equipment and
represent a serious danger to the user.
The use of the device in the rain or a damp
environment is prohibited.
The manufacturer is not liable for damage
which is caused through inappropriate use
or incorrect operation.

General description

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Electric Weed Burner
- Conical nozzle
- Restrictor
- Surface nozzle
- Spatula nozzle
- Grill lighter nozzle
- Instruction Manual

Functional description

This tool is a hot air weed killer that rea-
ches a maximum discharge temperature of
650 °C at the nozzle outlet.
Please refer to the descriptions below for
information on how the operating elements
work.

Overview

1 Mains cable
2 Cable strain relief
3 Extension tube
4 Air inlet
5 Tool housing
6 Heat shield
7 Conical nozzle
8 Stand bracket
9 ON/OFF switch
10 Handle
11 Spatula nozzle
12 Surface nozzle
13 Restrictor
14 Grill lighter nozzle
15 Tool cable
16 Housing cover
17 Blow-off pipe

Technical specifications

Electric Weed Burner ..PUV 2000 C2
Motor input power P ...................2000 W
Mains voltage U .............. 230 V~, 50 Hz
Safety class ......................................
Temperature (nozzle outlet) ....max. 650 °C
GB MT
II
17