Hohem iSteady Pro 4 Benutzerhandbuch Seite 9

Gimbal Mode Button
Tap the button to switch to different
working mode.
PF (Pan Follow)
Default mode, tilt and roll axis are both locked, camera is
able to move to left or right smoothly.
PTF (Pan and Tilt Follow)
Roll axis is locked, camera is able to move left/right and
tilt up/down.
L (All Locked)
The camera stays in its current orientation.
POV (All Follow and Inception)
All Follow – Tilt axis, roll axis and pan axis all follow the
movement of the gimbal.
Inception – Hold the gimbal horizontally and push
joystick to left or right.
Long press for six seconds to enter offline
calibration.
Calibrating the gimbal is required only when
you notice that the gimbal is not level or drifts
on any of the axes.
9