Transportation, Storage And Disposal; Technical Data - Husqvarna CG 200 Bedienungsanweisung

PROBLEMS
Ineffective operation
with jerks and consid-
erable vibration
Transportation
Consider the following points when transporting the
product.
• The height of the steering shaft can be adjusted by
rotating the knob (1).
Equipment technical data
CG 200
Cutting depth, max, mm
Useful working width, mm
Rated Voltage (V)
Weight (no fuel, no oil excluding tools) kg
Dimensions (L x W x H), mm
Drum rotation speed (maximum off load), rpm
12
CAUSES
Drum position too low
Tools worn out
Groove or mill makes abnormal
vibration
Abnormal cutter wear

Transportation, storage and disposal

Technical data

REMEDIES
Check the drum (mills) fixture. Change the drum or the
cutters, brush, and so on.
Check the rotation of the cutters on the four shafts.
Change the drum or the cutters.
• Upon installation at the work site, the product can be
moved without running the engine simply by pushing
it along on its three wheels.
• A lifting eye (2) enables the lifting of the product.
Storage
WARNING:
upright position, not accessible to children.
Disposal
In the event of deterioration and scrapping of the
product, the following items must be disposed of in
accordance with the requirements of the legislation in
force.
• Motor : Aluminium (AL), Steel (AC), Copper (CU),
Polyamide (PA)
• Product : Steel sheet (AC), Cast iron (FT),
Aluminium (AL)
Electric Gasoline 5hp
13
200
220-240
58
780 x 475 x 730 780 x 470 x 730
1350
Store in a dry place in an
Gasoline 9hp
13 13
200 200
N/A N/A
54 64
840 x 530 x 730
1350 1350
130 - 004 - 19.01.2023