Using The Line-Array Speaker Manager Application For Setup - Sony SLS-1A Bedienungsanleitung

Using the Line-Array
Speaker Manager
Application for Setup
Make setup of the speaker with the Line-Array
Speaker Manager application. For detailed
instructions, refer to the Help Guide (https://rd1.sony.
net/help/ha/lsm/h_zz/).
1
Join the speakers together, connect audio
devices, and connect the speakers to AC
outlets (page 7).
2
View the MAC address (  ) of the speaker.
3
Install the Line-Array Speaker Manager
application on a computer.
The Line-Array Speaker Manager application can
be downloaded from the website at:
https://pro.sony/products/professional-
speakers/SLS-1A
4
Connect the computer to the same network
as the speaker, using an Ethernet cable.

LAN
Hint
• The computer and the speaker may not necessarily
be connected directly. When a network switch and a
router are used, the computer and the speaker can be
connected via them as well.
5
Start the Line-Array Speaker Manager
application.
If the "Device Detection" window opens, make
sure that the speaker and other devices connected
with the computer are detected, and then click
[OK].
Placement tab
Specify the placement of the speaker.
View the MAC address of the speaker (displayed
as "SLS-1A-MAC Address").
You can change the placement setup or the name
of the speaker.
6
Make system setup.
Routing tab
You can view or change the input source.
Beam tab
You can make beam control setup.
15
GB