Cancel A Marked Fishing Spot; Binding The Transmitter And Receiver (Boat) - Reely RBR-BT600 Bedienungsanleitung

j) Cancel a marked fishing spot
11

16. Binding the transmitter and receiver (boat)

The transmitter and receiver should already be bound when you receive it. If you need to re-establish a connection,
follow these steps:
1. Start with the transmitter power off [OFF] and the
boat battery cable disconnected.
2. Press and hold the [ST/L] button and switch the
transmitter power on [ON].
3. When the GPS light [GPS ON] lights up, release
the [ST/L] button.
1. Press and hold the corresponding [GPS POSITION-
ING] button for over 5 seconds.
2. The corresponding [GPS POSITIONING] indicator
light will switch off.
4. Connect the boat battery and then switch the boat
power button on.
5. The transmitter and receiver should now be bound.
Repeat the steps 1 - 5 if needed.
43