Failsafe - Reely RBR-BT600 Bedienungsanleitung

4
5
f) Failsafe
Important:
For the failsafe to function correctly, you must first set the "home point". See "c) Home point setup & return
home function" on page 40.
• The failsafe will automatically return the boat to the home point if the boat goes beyond 500 m or the connection
between the boat and transmitter is lost.
• If the boat is within control range (300 m), you can override the failsafe by using the throttle trigger or steering to
gain manual control.
2. On the transmitter, press and hold the button
[GPS ON] for over 5 seconds.
3. The GPS indicator [GPS ON] will change from
flashing green to solid on. The home point has
been set.
Return home function
1
1. Press and hold the GPS on [GPS ON] button for
approximately 1 second.
2. The GPS return indicator [GPS RETURN] will
light up. The boat will automatically start making
way back to the home point.
- Disengage: use the throttle trigger or steering
to regain manual control of the boat.
- Re-engage: press and hold the GPS on [GPS
ON] button for over 1 second.
3. When the boat has returned to the home point,
the transmitter (remote) will beep and the GPS
return indicator [GPS RETURN] will switch off.
41