Mark A Fishing Spot - Reely RBR-BT600 Bedienungsanleitung

g) Mark a fishing spot
Important
Cancel all the marked fishing spots before fishing at a new location. See "j) Cancel a marked fishing spot" on
page 43.
You can set up to four fishing spots to release bait, and then deliver the hook to the same location.
8
1. Drive out to a location where you want to mark
a fishing spot.
2. Press and hold any of the GPS positioning [GPS
POSITIONING] buttons for over 5 seconds. A
mark fishing spot [MARK FISHING SPOT] in-
dicator will light up to indicate a spot has been
marked.
9
4. When the boat arrives at the marked spot.
- The go to fishing spot [GO TO FISHING SPOT]
indicator will switch off.
- The transmitter will beep.
42
3. To return to a marked fishing spot:
- Press and hold the GPS positioning [GPS PO-
SITIONING] button for 1 second.
- A go to fishing spot [GO TO FISHING SPOT]
indicator will light up to indicate the boat is
auto-navigating to the marked spot.
5. Repeat steps 1 - 4 to mark up to four fishing
spots. The corresponding indicators will light up.