Establishing A Gps Connection; Home Point Setup & Return Home Function - Reely RBR-BT600 Bedienungsanleitung

a) Establishing a GPS connection
2
c) Home point setup & return home function
Important:
• It is important to set a GPS starting point. This will act as the one button return point or failsafe in case the
transmitter fails, or the boat goes beyond control range.
• If the battery runs low and a home point has been set, the boat can return to shore before the battery runs
out.
40
1. Switch the transmitter power on [ON]. The transmitter indicator [TX] will light
up.
2. Press the power button on the boat to switch the receiver on. The transmitter
indicator [RX] will light up.
3. Wait for the GPS on indicator [GPS ON] to flash green. This means that
GPS is working correctly.
Depending on the conditions it can take up to 5 minutes to establish
a GPS connection.
v
Home point setting
1OrOrOriginv
1. Control the boat to a spot 10 m away from shore.
This will be the point you need to set for return.