Usa-Ansi-Warnung - Getac X600 Benutzerhandbuch

USA-ANSI-Warnung

Equipment approved for ANSI/UL121201 and CSA C22.2 No. 213, Nonincendive
Electrical Equipment for use in Class I, Division 2, Group A, B, C, and D.
Ambient temperature: -29°C to 50°C
EXPLOSION HARZARD WARNINGS:
External connections/hubs through the connectors as mentioned (power

jack, HDMI, USB, RJ45, RS-232 (or VGA), audio, smart card slot, SD card slot,
USB Type C, PC card slot, ExpressCard slot, SIM card slot, DisplayPort) are
NOT to be used in a hazardous location. When used with a docking
station (such as the office dock or vehicle dock), the docking/undocking of
the equipment must be conducted outside the hazardous area.
Docking/undocking in a hazardous area is prohibited.
The notebook is to be only powered from the battery pack while in

hazardous locations. Power adapter is NOT certified to use in hazardous
locations and NOT to be used in hazardous locations.
The battery must only be changed in an area known to be non-hazardous.

DO NOT disconnect equipment unless power has been switched off or

the area is known to be non-hazardous.
DO NOT remove or replace a user-removable item (such as the battery

pack, SD card, smart card, etc.) while the circuit is live unless the area is
free of ignitable concentrations.
Replace the battery with battery model BP3S2P3450P-02 or BP3S2P2100S-

03, manufactured by Getac Technology Corporation only. Use of another
battery may present a risk of fire or explosion.
Inspect equipment after any drops and return equipment to its original

condition. If equipment cannot be returned to its original condition,
then equipment is to be removed from use in hazardous (classified)
locations.
94