EN
memory card can be inserted into the phone. Card slots
(SIM or memory) are on two floors, each card belongs to
one floor (slot).
4. Replace carefully the back cover of the phone, until you
hear, it snaps.
GA80s, GA80 Plus, GA90, GA100:
Installing the NANO SIM and microSD card:
Switch your phone off before installing the cards.
1. Pull the pin for ejecting the SIM card slot from the
package.and insert it into the hole in the compartment for
the SIM card until until it jumps off from the body of the
phone.
2. Gently remove the compartment out of the slot.
3. a) 2x NANO SIM or b) 1x NANO SIM and 1x micro SD
card align as shown in the manual and gently insert them
into the compartment.
4. Put the entire compartment together with the cards back
into the phone. Ensure the correct orientation – cards to the
back of the phone!
GA60 Pro, GA70, GA80s:
Charging the battery:
Before putting your phone into service you must recharge its
battery for 100%.
1. Connect the adapter into the charger. Make sure that the
adapter is inserted in the correct position. Do not use the
force when connecting a plug.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the phone from
the charger.
GA80 Plus, GA90, GA100:
Charging the battery:
25