EDIFIER CC200 Bedienungsanleitung Seite 2

EN
Power ON/OFF
3s
Power ON: Press and hold the "
LED will be lit for 1s.
Power OFF: Press and hold the "
will be lit for 1s.
Pairing
3s
Pairing for the rst time
1. Press and hold the "
will blink alternately and rapidly.
2. Select "EDIFIER CC200" in your device setting to connect. Green LED will
blink twice rapidly then off after connected.
Note: For subsequent use, the headset will auto-connect to device used last
time.
Pairing for new device
1. Press and hold the "
will blink alternately and rapidly.
2. Select "EDIFIER CC200" in your device setting to connect. Green LED will
blink twice rapidly then off after connected.
" button for 3s when power OFF. Green
" button for 3s when power ON. Red LED
" button for 3s when power off. Red and Green LED
" button for 5s when power off. Red and Green LED
Indicator
Indicator