EDIFIER CC100 Kurzanleitung

Wired Mono Headset with Microphone
EN 1. Power ON/OFF
ON
USB-C
or
USB-A
Plug the headset cable into the USB-C port on your device to power
it on. Unplug the cable to power it off.
Note: You can also use the included USB-C to USB-A adapter to
connect the headset to a USB-A port.
2. Controls
Red Indicator light
Note:
1. "x 1" Press, "
2. The mute button only works during calls or recordings, and the red
light remains on when successfully activated.
3. Button functions vary by source device and control methods may
vary by system or model.
CC100
Manual
x1
x1
x1
" Press and hold.
OFF
x1
x1
x1