cecotec CECOFRY FULL INOX 5500 Bedienungsanleitung Seite 46

ENGLISH
6. Press the On/off icon (8), then select the desired pre-set function (13) or set the desired
time (1-60 minutes) and the temperature (80-200ºC) and press the On/off icon (8). The
fryer will start operating.
7. If at any point during cooking, you wish to pause the process, press the On/off icon. If
you wish to end the cooking process, hold down this icon (8) for 3 minutes. If you do not
press any icon for the next minute after pausing, the fryer will enter standby mode and
will beep 3 times.
8. When you hear an alarm, it means that the preparation time has come to an end. Use the
handle (4) to remove the basket (3). Depending on the type of ingredients, steam may be
released, so be careful when removing the basket (3).
9. Check if the ingredients are cooked as desired. If not, put the basket (3) back inside the
device and set the timer for a few more minutes.
10. To remove the ingredients, place the basket (3) on a heat-resistant surface.
11. Place the basket ingredients on a proper container. Use tongs to remove ingredients, as
this will prevent residual cooking oil from dripping onto the container. Be careful not to
burn yourself. Do not place the basket (3) upside down to remove the food.
12. You can continue using the fryer if desired or you can finish the cooking process, to do so,
hold down the On/off icon (8) for 3 seconds.
Control panel
On/off icon
When the basket (3) and the rack (5) are placed in the correct position inside the air fryer,
-
the On/off icon (8) will light up.
- To turn the air fryer on, press the On/off icon (8), the air fryer will beep and the display will
show 200ºC / 18 minutes alternately.
You can set the desired time and temperature or select a pre-set function. Press the On/
-
off icon (8) to start the selected function or the manual setting. If you press this icon again
(8), the fryer will pause.
- To finish the cooking process, hold down the On/off icon (8) for 3 minutes.
Pre-set functions
To use the pre-set functions, press the desired function icon and the display will show
the pre-set time and temperature for this function, you can also set it if desired with the
temperature increase/decrease icons (9/10) and the time increase/decrease icons (11/12).
The table below shows the temperatures and times of the pre-set functions, the amount of
food that can be inserted and whether stirring is required.
46 CECOFRY FULL INOX 5500
CECOFRY FULL INOXBLACK 5500