Gigaset W570 Bedienungsanleitung Seite 97

Gigaset W570 / LUG MEA-ZA en / A31008-M2708-M231-1-3Z19 / appendix_legal_Widex.fm / 10/1/19
The device turns itself off even though the battery is still 2/3 charged according to the display
•
The contacts/batteries are unclean or corroded
( p. 9)
Call is interrupted or completely disconnected
•
Radio signals are weakened by walls, ceilings, insulation etc.
metallic objects. Do not place the base in the cellar if possible (
Handsfree sound quality is not good
•
Dirt on the handset (e.g. make-up, dust, iron filings)
Loud crackling, background noises, interference, scratching, changing volume
•
Interference from other devices (network components of fax, PC, printer, mobile phone)
distance to other devices (at least half a metre) (
You cannot make calls and "BASE" or "No base" is flashing in the display
•
The power cable is not connected to the base:
"Not possible!" appears in the display
•
Telephoning externally is not possible whilst another external call is being made.
call has ended (does not apply if the internal listening function has been activated).
•
Making an external call whilst another party is speaking on your answer machine.
announcement on the answer machine has ended
Time is reset to the default setting
•
Base and handset were deactivated at the same time
No time is specified in the call list
•
Date/time is not set
Consultation call, call swapping, conference not possible.
•
These functions that can be executed on the device must be provided and enabled by the network
provider. Operation can vary from one network provider to another.
Volume of the handset (earpiece volume) too quiet
•
¥ The volume is at the lowest level
Change the earpiece volume setting (
¥
Change the handset position on the ear
Handsfree volume too quiet
•
The volume is at the lowest level
You hear a tone during operation
•
Action has failed/invalid input
•
The batteries are empty
•
The system PIN you have entered is incorrect
You hear a tone during the call
•
The batteries are empty
Forgotten system PIN
•
Reset the system PIN to 0000 (
Error tone sounds after system PIN prompt
•
The system PIN you have entered is incorrect
The device has come into contact with liquid
•
Allow the device to dry.
The emergency function could not be configured
•
You have not saved any emergency numbers
•
The emergency function is not activated
•
The emergency function only works when the device is directly connected to the network or to a PABX
that does not require "R" or "P" for network assignment
de en fr nl
Clean the contacts/batteries or replace the batteries
Check the base power adapter (
Set date/time ( p. 10)
p. 36)
Change the handsfree volume setting (
Repeat the process. Read the display and refer to the user guide
Charge the batteries (
Re-enter the system PIN or reset (
Charge the batteries (
p. 39)
Re-enter the system PIN or reset (
Contact with liquid ( p. 46)
Save at least one emergency number (
Activate the emergency function (
Customer Service & Assistance
Do not place the base behind/beneath
p. 7)
Clean the handset ( p. 45)
p. 7)
Reset the time ( p. 10)
Contact your network provider
p. 9)
p. 9)
Emergency function direct dial key (
Increase the
p. 7)
Wait until the other
Wait until the
p. 36)
p. 39)
p. 39)
p. 24)
p. 24)
p. 24)
43