Tesvor S6 Smart Robot Vacuum Benutzerhandbuch Seite 9

Preparation
1) Install the side brushes before use. Please note L and R should correspond to each
other when installing the side brushes.
2) Turn on the main power switch on the side of S6.
Remove before use Remove the proactive film before use
3) Place the Charging Base on a hard, level surface and against a wall.
4) Do not place any objects within 3.3 ft. to the left / right and 6.6 ft to the front of the
charging base, and do not place any mirrors or other reflective objects within this range.
9