Tesvor S6 Smart Robot Vacuum Benutzerhandbuch Seite 14

Relocation by LDS
During cleaning, when pause the robot and take it to a new area, then restart it to
resume cleaning, the robot will begin relocation and move to its previous place.
Set Time and Scheduled Cleaning
Set Time
NOTE: Make sure the time is set correctly to your local time before setting a scheduled
cleaning.
1. Make sure the main power switch on the bottom of the S6 is turned on.
2. Press on the remote control. The time will blink on the display.
3. Press
NOTE: Make sure AM/PM is set correctly.
4. Press to save the setting.
to set the "hour" and "minute".
14