Switching Modes
NOTE: Make sure the power switch on the side of the S6 is turned on before use.
Wake up
Sleep mode means that the S6 is stopped, and the indicator light is off. If the S6 is not
active for 10 minutes, it will enter Sleep mode automatically. Press
on the remote
controller to wake it up.
Start
Under the Standby mode, press
on the S6 or Plan cleaning on the remote control to
start the robot.
Pause
The pause function switches the S6 from the operating mode to the selected mode, and
it can be paused by the following operations:
Press
on the remote control or robot to pause it.
NOTE: If the S6 is out of service for a long time, please turn the power switch off.
12