Cleaning And Maintenance - Siguro Sgr-Rc-R700B Übersetzung Der Betriebsanleitung

2. Press the button to open the lid and insert the cooking vessel inside.
3. If necessary, wipe the edge of the cooking vessel.
4. Press repeatedly the FUNCTION, button until the "Steam" light starts flashing.
5. The "Steam" light will flash for about 5 seconds, then an audible alert will sound
and the appliance will start automatically.
6. When the cooking process is completed, an audible alert sounds five times, the
"Steam" light goes out and the appliance automatically switches to keep warm
mode. The default keep warm mode time is 12 hours. If you need to cancel the keep
warm mode, press the CANCEL.
KEEP WARM (keep warm) function
The default time of the KEEP WARM function is 12 hours.
While the appliance is in the standby mode, press the WARM/CANCEL.
1.
2. The KEEP WARM function will activate and the appliance will start heating the
food and keep it warm.
3. If you need to cancel the KEEP WARM function, press the button WARM/CANCEL.
PRESET (delayed start) button
1. Put the ingredients in the cooking vessel and insert it in the appliance.
2. Select the cooking method by pressing repeatedly the FUNCTION.
3. While the selected cooking light is flashing, press the PRESET button and the
display will show the default delayed start time.
4. Press repeatedly the PRESET button to set the time after which the appliance
will automatically start. Each time you press PRESET you increase the time by 30
minutes. Once you reach the maximum delayed start time and presss the PRESET
button again, the minimum delayed start time will displayed. You can set a delayed
start time from 1 to 24 hours.
5. After adjusting the cooking time, wait about 5 seconds for the time to save and the
countdown to start.
6. Once the set time elapses the appliance starts automatically.
It is important to select the cooking method before setting the delayed start time. The
delayed start function will not work if the order is reversed.
The delayed start function cannot be set when the appliance is already running.

CLEANING AND MAINTENANCE

Before cleaning or any maintenance, always switch off the appliance, disconnect the
plug from the power outlet and allow it to cool down completely.
Warning:
Never immerse the appliance, the power cable and plug in water or any
other liquid.
Do not use plastic or metal scrapers, harsh cleaners, chemicals, petrol, solvents or
other similar substances to clean any parts of the appliance. The surface finish could
be seriously damaged.
Heating element and internal space for inserting the cooking
vessel
Wipe the outer surface of the appliance and the inner space for inserting the cooking
vessel with a clean cloth slightly moistened with warm water.
EN - 9
EN