2.4 | Power plug
WARNING: Turn the power supply off before installing Bob.
Connect the power cable to Bob's electric outlet
Before you connect Bob to the power supply, make sure that the voltage on the type plate
corresponds to the voltage of your power supply.
The appliance must be placed on an even and stable surface. Daan Tech is not liable for
any damage caused by placing the device on an uneven and/or unstable surface during use.
3 | G
ETTING STARTED
When you turn Bob on for the fi rst time, you will need to confi gure its
Bob OS is the operating system developed by Daan tech. Its colourful interface allows you to easily
navigate the different menus.
Bob OS also enables you to connect Bob to WiFi, allowing for automatic updates, enabling new
features instantly.
How to navigate the menus
To select an option scroll from left to right until the icon indicating the desired menu or option
appears, press the central button to choose it.
A confi rmation message appears, which you can either confi rm using
latter also redirects you to the previous screen.
2.4" colour LCD display
Do not plug or unplug by pulling the cord, always pull the plug
directly.
Left switch
Connect the power cable to a 220- 240V
50Hz plug (for US 110-120 V, 50-60Hz)
settings.
Central button (OK)
or reject using
Right switch
. The
5