Filter Maintenance - Daan Tech Bob Schnellstartanleitung

After each cycle
Once a week or every 10 cycles

Filter maintenance

Remove the coarse waste fi lter with one hand using
its two grip tabs.
Dispose the waste in the bin, clean the coarse waste fi lter
with clean water and put it back in place.
Turn the microfi lter counter-clockwise to unlock the microfi lter/
coarse fi lter combination.
Lift out the stainless steel fi lter.
Rinse the 3 fi lters under running tap water and clean them with a
soft bristle brush
Put the stainless steel fi lter back into Bob.
Now reinsert the micro fi lter/coarse waste fi lter combination by
turning it clockwise until it clicks to ensure its correct position.
Warning: Never start a cycle without the fi lters in place.
If your microfi lter is damaged, please contact Daan Tech
customer service (page 38).
31