Wash Cycles; How A Wash Cycle Works In Bob - Daan Tech Bob Schnellstartanleitung

3 | W
ASH CYCLE

3.1 | How a wash cycle works in Bob

A wash cycle comprises several steps. You can follow the progress of the
You can see several information on the screen:
Remaining time
(minutes and seconds)
Make sure that your dishes are positioned correctly in the basket, as recommended on
page 17.
Close the door. Warning: the cycle cannot be initiated if the door is open or not properly closed.
Check if a Bob cassette is correctly inserted. If you don't use Bob cassette, use another
detergent such as Bob Tablette.
Choose the most appropriate program according to your dishes and the degree of soiling.
Start the cycle on Bob's colour display (see page 12).
Fill the water tank until the signal sound occurs if your Bob is in the water supply mode "built-
Emptying in water tank."
Cancelling an ongoing cycle
Press the central button
Select to abort the current cycle and to initiate draining.
You will automatically be redirected to the home screen.
20
current wash cycle on Bob's home screen
Icon for the current program
Before starting a wash cycle
Warning: Ensure that the drain hose is correctly attached to a
drain or a container during the entire cycle. Water is drained
several times during a cycle.
Let's go! The cycle is running!
During a wash cycle
to pause the current cycle.
Washing
49:00
Icon for the current step
Current step