Exterior And Screen; Spray Arm - Daan Tech Bob Schnellstartanleitung

3.
Go to the Bob cassette screen and navigate to the rock'n'roll cassette (maintenance cycle) and
then press to start the cycle
4.
The cycle takes about 60 minutes and cleans your Bob thoroughly: pumps, hoses, basket...
5.
Each rock'n'roll cassette is intended for one-time use (all the contents are used up during
1 maintenance cycle)
6.
Once the rock'n'roll cassette is empty, you can return it to Daan Tech to avoid throwing it
away. We take care of refi lling it.
7.
Use a rock'n'roll cassette every 90 cycles to keep your Bob in good shape!
Conventional dishwashers have a regenerating salt tank for anti-calcifying the water, which must
continuously be monitored and frequently refi lled.
Bob does not require any dishwasher salt as everything is contained in the cassette! The
limescale is automatically removed with the "rock'n'roll" cassette solution.
4 | E
XTERIOR AND SCREEN
Depending on the amount of grime on your Bob.
To clean the exterior of Bob, simply wipe it with a damp cloth or wipe
Do not use any scouring agents, chemical solvents, or strong detergents as they could
damage the coating on Bob.
To prevent water from getting into the electronic components, screen, buttons or door lock
system, do not use a cleaning spray.
5 | S
PRAY ARM
If you encounter problems with the spray arm or have noticed that it no longer turns, ther may be
a nozzle blockage that is preventing it from turning. In this case, please follow the instructions
below to clean the spray arm.
To remove the spray arm, unscrew the ring at the base of the
spray arm with one hand.
Wash the spray arm under running water and remove any food
residue from the spray nozzles.
Put it back in place and make sure that nothing hinders its
rotation.
33