Technical Data; Installation; Mounting The Hose - Nederman 865 Bedienungsanleitung

3.4 Technical data

Item
Weights
• Without hose
• With hose and nozzle
Duct connection
Recommended airflows
• For cars, 100 mm (4") hose
• For trucks, 125/150 mm (5"/6") hose
Ambient temperature
Exhaust temperature
Hose temperature resistance
• HoseNR-CP
• HoseNFC-3
Power supply
Power consumption
Protection class
Noise level
Material recycling

4 Installation

See Figure 2.
A* Short model.
A** Wide model.
*** Wall holder for the hand control.
NOTE!
The maximum mounting height is depending
on the hose length and weight. The maximum
allowed uncoiled free-hanging hose weight in-
cluding nozzle is 30 kg. Choose such mount-
ing height so that the hose in uncoiled position
can be connected to the vehicle's exhaust pipe
without being stretched.
1 Make sure that the surface, on which to mount the
reel, is level. Drill 4 holes, using the hole template
which comes in the package.
Exhaust Hose Reel 865
Dimension
31 kg (68 lbs)
40 – 50 kg (82 – 110 lbs)
Ø 160 mm (6.3 in)
3
400 – 600 m /h (235 – 350 cfm)
3
800 – 1200 m /h (470 – 700 cfm)
-10 °C to +50 °C (15 °F to 120 °F)
Maximum 300 °C
150 °C (300 °F) continuously
300 °C (570 °F) continuously
100 V, 115 V, 200 V, 230-240 V AC 1-phase, 50/60 Hz
Maximum 325 VA
IP 44
Measured according to ISO 11201. < 70 dB(A).
Reels without hose: 100 weight-%
2 Fit the mounting brackets in such a way that it will
make the reel hanging horizontally. Ensure that
suitable fixing bolts are used considering the ceil-
ing or wall construction material. The bolts must
each stand a tractive force of a minimum of 6500
N.
3 Use approved lifting equipment to lift the reel.
Fasten the reel in the brackets.
4 Make sure that the indicator is not pointed at a
light source, it may interfere with the function of
the remote control.

4.1 Mounting the hose

See Figure
been mounted and connected to the power supply,
the hose should be fitted (concerning reels delivered
without hose only). It should be noted that the reel
can not be rotated by hand.
3. When the Exhaust Hose Reel 865 has
EN
13