HBM K148 Bedienungsanleitung Seite 6

Safety instructions
S Please observe the permissible maximum ambient temperatures and
humidity stated in the specifications.
S Install the device so that it can be disconnected from the supply voltage at
any time without difficulty.
S It is safe to operate the K148 up to a height of 2000 m.
Maintenance and cleaning
The K148 is maintenance-free.
S Before cleaning, disconnect all connections.
S Clean the housing with a soft, slightly damp (not wet!) cloth. You should
never use solvents, since these could damage the labeling.
S When cleaning, ensure that no liquid gets into the module or connections.
Residual dangers
The scope of supply and performance of the K148 only covers a small area of
measurement technology. In addition, equipment planners, installers and
operators should plan, implement and respond to the safety engineering
considerations of measurement technology in such a way as to minimize
remaining dangers. On-site regulations must be complied with at all times.
There must be reference to the remaining dangers connected with
measurement technology.
Product liability
In the following cases, the protection provided for the device may be adversely
affected. Liability for device functionality then passes to the operator:
S The device is not used in accordance with the operating manual.
S The device is used outside the field of application described in this Chapter.
S The operator makes unauthorized changes to the device.
4
A01681_03_X00_04 HBM: public
K148