HBM K148 Bedienungsanleitung Seite 20

Operation
Display
The K148 uses status LEDs to indicate its actual operating state.
LED POWER is a green light that shows when the power supply is present.
LED READY and an acoustic signal transmitter can be driven by the program
in computer mode (see Page 22).
For setting the acoustic display, see Page 20.
LED REMOTE is lit when the K148 is being operated via the USB connection
or the serial interface.
Settings
Channel selection
Use the arrow keys to select the channel (example: LED 4 is lit: channel 4 is
active). If none of the LEDs are lit, the device is in single-channel mode.
Polarity
+ / −
Key is used to select the positive or negative polarity of the output sig­
nal (example: LED + is lit: the output signal has positive polarity).
18 K148
A01681_03_X00_04 HBM: public