Pin Assignment - HBM K148 Bedienungsanleitung

Operation
Notice
By use with the USB Port this a Class A product. In a domestic environment
this product may cause radio interference in which case the user may be re­
quired to take adequate measures.
5.1.2

Pin assignment

Single-channel measuring mode (single channel)
This connection scheme applies to measuring amplifiers that work with a six-
wire circuit (sense lines for the excitation voltage). This ensures that measure­
ment accuracy is not affected by the lengths of the measuring cables being
used.
2
1
4
3
Fig. 5.1 :K148 connector pin assignment (single channel)
12
Assignement
Measurement signal (+)
Bridge excitation voltage (-)
Bridge excitation voltage (+)
Measuring signal (-)
Cable
shield
Sense line (+)
Sense line (-)
A01681_03_X00_04 HBM: public
PIN
8
1
5
6
8
15
15-pin SUB-D
connector
13
12
K148
9
15