HBM K148 Bedienungsanleitung Seite 17

Connection cable, 25‐pin; 1-Kab263-3
CHANNEL 1... 4
13
25
Connection cable, 25‐pin; 1-Kab263-3
Fig. 5.4 Connection cables to HBM amplifiers
With single‐channel mode (SINGLE CHANNEL), a cable must not be con­
nected to the 25-pin connection sockets (CHANNELS 1...4 and CHANNELS
5...8) and vice versa. It is advisable to always use the cables included among
the items supplied. Should the calibration unit have been calibrated, these
cables need to be used, since they were part of the calibration. The calibration
is therefore valid at the cable end.
K148
CHANNEL 5... 8
1
13
14 25
A01681_03_X00_04 HBM: public
HBM Amplifier
AP810i/AP815i
1
13
1
1
14
13
Operation
14
Subchannel
1...4
25
14
Subchannel
5...8
25
15