Technical Specifications - VINCENT SA-T7 MK Bedienungsanleitung

Frequency Response:
Output Voltage:
T.H.D.:
Amplification:
Input Sensitivity:
Signal-to-Noise Ratio:
Input Impedance:
Max. Power Consumption:
Inputs:
Outputs:
Tubes:
Playable Digital Formats:
Colour:
Weight:
Dimensions (WxHxD):
Sintron Distribution GmbH hereby declares that this product complies with the
Radio Equipment Directive 2014/53/EU. The corresponding EU declaration of
conformity is available at the following internet address: www.sintron.de/KE
FURTHER INFORMATION AS DEFINDE BY THE
Power consumption in OFF-mode:
Power consumption in auto standby mode:
Power consumption in cross-linked standby mode (BT):
Time without input signal until auto-standby: 15 min. (autostandby can be switched off).
The wireless cross-link port (BT) can be deactivated (switched off) with the input selector (INPUT).
42

TECHNICAL SPECIFICATIONS

10Hz – 100kHz +/- 0,1 dB
3 V
< 0,001 % (1 kHz, Output Voltage 2Veff an 10 KOhm)
typ. 13,3 dB (Volume Control max. Gain)
430 mV (2V Output Voltage)
typ. > 100dB (A)
> 22 kOhm
58 Watt
6 x Stereo RCA, 1 x Optical, 1 x Coaxial, 1 x Bluetooth
2 x Stereo RCA Pre-Out, 1 x Stereo RCA Rec-Out,
2 x 3,5 mm Jack (Power Control)
4 x 6SCH9P, 4 x 6SCH51P, 1 x 85A2
WAV, FLAC, APE, LPCM, MP3, ACC, AC3, WMA
Black / Silver
8,5 kg
430 x 135 x 370 mm
ECODESIGN REGULATION
<0,4W
<0,4W
<4W