Technical Specifications - VINCENT powerLine SP-331MK Bedienungsanleitung

Symptom
Poor sound quality
Humming low fre-
quency noise is
audible, even as
no audio source is
playing back
Frequency response:
Nominal Output Power per channel in Class A at 8Ω:
Nominal Output Power per channel at 8Ω:
Nominal Output Power per channel at 4Ω:
Input sensitivity:
Total Harmonic Distortion:
Signal to Noise Ratio:
Input Impedance:
AC power connection type:
Inputs:
Outputs:
Dimensions (W x H x D):
Weight:
Colour:
Tubes:
Vincent
30
SEARCH FOR ERRORS
Possible Cause
The cable connections are not tight, the con-
nectors are dirty or a cable is defective.
A record player has been connected to a line
level input of the preamplifier without using a
phono preamplifier.
An audio source with standard line level out-
put (example: CD player) is connected to the
power amplifier direct input "INPUT" (5).
One speaker pair is connected in bi-wiring,
but not both speaker outputs (SPEAKER A and
B) are activated on the front panel
See section "Net frequency noise"
in the chapter "Tips".

TECHNICAL SPECIFICATIONS

Countermeasure
Check the cables and cable connections.
Interconnect a phono preamplifier.
Do not connect line level audio sources at the
input (5).
Turn on both speaker pairs (3).
See section "Net frequency noise"
in the chapter "Tips".
10 Hz - 20 kHz ±0.5 dB
10W
150 W
300 W
1.5 V
< 0.1% (1 kHz, 1 W)
> 95 dB
47 kΩ
220V – 240V/50 Hz
1x RCA Main Input stereo
loudspeaker clamps for up to
4 loudspeakers
430 x 195 x 400 mm
22 kg
silver / black
2x 6N16, 1x 12AU7