VINCENT SA-T7 MK Bedienungsanleitung Seite 38

Operation
Switch off tone control
(BASS/TREBLE)
Change the brightness
of the tube window
illumination
Switching between
digital and analog
input signal
Playback of music by
Bluetooth
38
OPERATING THE APPLIANCE
Button(s) Description
If the sound is not to be changed, it is recommended that you switch off
the sound control (BASS, TREBLE) with this button on the front of the
device. When this button is pressed, the sound processing settings in the
Tone (4)
tone controllers (1)(3) come into play. If the button is not pressed, the
two sound controllers in the preamplifier are bypassed and the signals
from the source are not changed in terms of their frequency levels.
The window for the visible tube (5) could be illuminated with four bright-
DIMMER (16)
ness settings. You can change the brightness by the switcher (16) on the
backside of the unit.
If you have connected devices to the digital inputs (13) via optical or
coaxial cable or use the Bluetooth input (14), you can select these in-
ANALOG/
puts by pressing the Analog/Digital (8) button. To do this, set the rotary
DIGITAL (8)
control input (7) to the appropriate input. If the button is not pressed, the
appropriate analog inputs (11) are active.
1. Please select the Bluetooth input (S4) on the SA-T7MK.
2. Please activate the Bluetooth connection on your smartphone, tablet
or computer.
Bluetooth
3. Please select the search for new Bluetooth devices on your smart-
Function phone, tablet or computer. You will find the SA-T7MK under the
name "Vincent" in your list.
4. Please choose "Vincent" to connect.
5. The SA-T7MK is connected you can start the playback.