Safety Instructions; Product Overview; Product Layout - Gens Ace Imars Dual Bedienungsanleitung

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

• Always connect the charge cable to the charger first, then connect the battery to avoid short circuit

between the charge leads. Reverse the sequence when disconnecting.

• Always connect the positive red leads (+) and negative black leads (–) correctly.

• Always disconnect the battery after charging, and let the charger cool between charges.

• Always charge in a well-ventilated area.

• Always terminate all processes and contact Gens Ace. if the product malfunctions.

• Charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to

burst, resulting in injury to persons and/or damage to property.

• The socket-outlet shall be installed near the equipment and shall be easily accessible.

WARNING: Never leave charger unattended, exceed maximum charge rate, charge with

non-approved batteries or charge batteries in the wrong mode. Failure to comply may result in

excessive heat, fire and serious injury.

CAUTION: Always ensure the battery you are charging meets the specifications of this charger

and that the charger settings are correct. Not doing so can result in excessive heat and other related

product malfunctions, which can lead to user injury or property damage. Please contact Gens Ace. or

an authorized retailer with compatibility questions.

• Before using this product, please read the following safety instructions. Please follow each instruction

to ensure your safety. Improper operation may result in serious injury to the user and/or property

damage.

• Do not use the charger unattended, if there's any abnormality, please disconnect the power supply

immediately;

• Keep the charger away from a humid environment and heat sources during use; please pay attention

to proper ventilation, heat dissipation, and keep away from flammable materials at all times.

• Please set the charge and discharge parameters correctly. The wrong settings may cause accidents;

• Please check the equipment for damage before use. Do not use the device if it is damaged;

• Do not place metal debris in or on any parts of the charger, or it may cause damage to the device or

injury to the user.

• This product is not a toy; do not allow children to operate the charger.

• After use, disconnect the power cord;

• Do not try to charge non rechargeable dry batteries;

• Please pay attention to the setting of the battery type when using; wrong settings may lead to serious

injury to the user and/or property damage;

• Do not disassemble the product. There are no user serviceable parts inside.

1. Product Layout

DC input port