Functional Buttons - HMS M1680 Bedienungsanleitung

FUNCTIONAL BUTTONS:

MODE - Push down for selecting functions.
SET - To Set the consumer movement of time、distance、calories and pulse.
RESET -For resetting consumer movement of time、distance、calories and pulse.
FUNCTION AND OPERATIONS:
1.SCAN: Press "MODE" button until "SCAN" appears, monitor will rotate through all the 6 functions: Time、speed、
distance、calorie、odometer and pulse. Each display will be hold 6 seconds.
2.TIME: (1) Count the total time from exercise start to end.
(2) Press "MODE" button until "TIME" appears, press "SET" button to set exercise time. Automatically
count down from targeting value during exercise.
3.SPEED: Display current speed.
4.DISTANCE: (1) Count the distance from exercise start to end.
(2) Press "MODE" button until "DIST" appears. Press "SET" button to set exercise distance. Automatically count
down from targeting value during exercise.
5.CALORIES: (1) Count the total calories from exercise start to end.
(2) Press "MODE" button unit "CAL" appears. Press "SET" button to set exercise calories. Automatically
count down from targeting value during exercise.
6. ODOMETER：Monitor will display the total accumulated distance.
7. PULSE: Press MODE button until "PULSE" appears. Before measuring your pulse rate, please place your palms of your
hands on Both of your contact pads and the monitor will show your current heart beat rate in beats per
minute(BPM) on the LCD after 6~7 seconds.
Remark: During the process of pulse measurement, because of the contact jamming, the measurement value may be
higher than the virtual pulse rate during the first 2~3 seconds, then will return to normal level. The
measurement value cannot be regarded as the basis of medical treatment.
NOTE：
1. If the display is faint or shows no figures, please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes.
EXERCISE CONSOLE WITH PULSE
INSTRUCTION MANUAL