User Interface - Led Icons Description - TESY AquaThermica Compact 150 Installations- Und Wartungsanleitung

8.2.

User interface - LED icons description

Symbol Function
Hot water available
Fan ventilation
Electrical heating
Defrosting
"Green" mode.
"AUTO" mode.
"BOOST" mode.
SET SET
TEMP TEMP
Left temperature display
OUT OUT
Right temperature display
Time display
1 1
ON ON
Timer 'ON'
2 2
1 1
Timer 'OFF'
2 2
OFF OFF
The icon indicates that the domestic hot water temperature has reached the set
point. The hot water is available for use. Heat pump is in standby.
The icon indicates that the fan ventilation function is enabled.
The icon indicates that the electrical heating function is enabled. The electrical
heater will work according to the control program.
The icon indicates that the defrosting function is enabled. This is an automatic
function; the system will enter or exit the defrosting according to the internal con-
trol program.
The icon indicates that the unit is operating in "Green" mode.
The icon indicates that the unit is operating in "AUTO" mode.
The icons indicate that the unit is operating in "BOOST" mode.
The icon indicates the key lock function is enabled. The keys Will be deactivated
Key lock
until this function is disabled.
The display shows the set water temperature. In case any malfunction occurs, this
section will display the related error code "P".
The icon indicates reached water temperature. When checking or adjusting the
parameters, this section will display the related parameter value.
The display shows the clock time or timer time.
The icon indicates that the timer 'ON' function is enabled.
The icon indicates that the timer 'OFF' function is enabled.
Error The icon indicates there is a malfunction.
Description
18