Software Settings - xpr WS4-CONV-V2 Benutzerhandbuch

5. SOFTWARE SETTINGS

5.1 WIEGAND 26 BIT
In the Settings/Configuration of the readers select "Wiegand 26bit", the one shown in the picture below.
•
• In the Doors/Reader/Card tab select "Wiegand (decoded)".
5.2 WIEGAND 32 BIT
In the Settings/Configuration of the reader select "Wiegand 32bit RAW", the one shown in the picture below.
•
In the Doors/Reader/Card tab select "Wiegand (decoded)".
•
This product herewith complies with requirements of EMC directive 2014/30/EU. In addition it complies with RoHS2 directive EN50581:2012 and RoHS3 Directive 2015/863/EU.
www.xprgroup.com
3